With a large-scale growth in the aviation industry, the demand for engines and the related components has increased to the extent that the engine manufacturers are now compelled to manufacture a huge number of engines per year. This factor, in turn, is boosting the growth of the engine blades market, as the demand is higher than ever before. However, there is a mounting pressure on the entire supply chain, as the aircraft manufacturers are planning to increase their production rates. The component and part manufacturers are expanding their production facilities, along with adopting the latest technologies, primarily to boost their production capacities. Owing to the growing demand, the companies are trying to attract new customers and boost up their market share by adopting technologies that can reduce the overall weight and emissions of the engines, which is boosting the R&D activities in the industry.

The market studied is primarily dependent on the demand from the armed forces, law enforcement agencies (police), and potential private owners. Due to the ever-increasing need for national and regional security, countries, such as India, the United Kingdom, France, and the United States are anticipated to be the primary centers in the market studied. Growing military expenditure of these countries is expected to help in this regard, by giving freedom to the militaries for spending huge amounts for the procurement of these vehicles, in order to satisfy the increasing demand. Countries with vast land-based borders are emerging as lucrative markets for armored vehicles. The procurement of land-based vehicles has been increasing, particularly in Asia-Pacific and Europe, due to the growing political tensions between the neighboring countries and increasing hostile activities in the regions. In addition, these factors are increasing the need for incorporating the latest technologies into the land vehicles. This, in turn, is a major driver for upgrade and retrofit activities.

Wood coatings are widely used in the protection and refinement of wood or wood-made structures. Protecting wooden surfaces help increase their utilization properties. Moreover, the use of wood coating enhances the aesthetic look of wooden object, which helps in marketing and selling of the product. Different types of wood coatings are available in the market such as varnish, stains, water-based coatings, and oil finishes. The Europe wood coatings market is segmented on the basis of resin type, technology, end use, and region. Depending on resin type, the market is classified into polyurethane, nitrocellulose, acrylic, unsaturated polyester, and others. By technology, it is fragmented into waterborne, conventional solid solvent borne, high solid solvent borne, powder coating, radiation cured, and others. As per end use, it is segregated into furniture, joinery, flooring, and others. Region wise, it is analyzed across Europe. The key players operating in the wood coatings industry include Akzo Nobel N.V., Axalta Coatings Systems, BASF SE, Jotun, Eastman Chemical Company, Kansai Paint Co., Ltd., Wendel Group, PPG Industries Inc., Tikkurila OYJ, and Teknos Group. In addition, the volume and revenue of the market is provided in the report in terms of million liters and $millions.

Machine vision provides machines with a gift of sight, complementing or replacing manual inspection tasks, using cameras and image processing. Machine vision applications range from basic tasks, like presence detection, to real-time inspection and grading tasks in harsh environments. Manufacturing firms across the world are realizing the benefits of machine vision systems, particularly in areas where redundant tasks, like inspection, should be performed with precision. They are playing an essential role in high-speed production lines and hazardous environments. Some of the significant benefits offered by these systems include increased productivity, reduced machine downtime, and tighter process control. In case of a pure 2D machine vision system, the target object image acquired for processing is effectively a flat, 2D plan view. This 2D image does not provide any height information. When utilizing 2D cameras, Z (distance from camera) is generally assumed. This is not as effective as parts may move, change size, etc. and then the 2D camera may miscalculate the location. Owing to such reasons, end-user industries are embracing 3D systems, that allows for a clean part pick-up with known positional data (X, Y, and Z), despite any disruption.

Data centers are mainly built in response to growing customer demand. However, the areas for the development and operation of data centers are identified based on factors such as power availability, fiber connectivity, and availability of skilled labor. Most of the modern data centers are built as per Tier III and Tier IV standards, thereby enabling high availability of service offerings. The Latin American market has grid power stability challenges. However, it supports free cooling, thereby reducing the power consumption by cooling systems. The major site selection criteria for data centers in Latin America are mentioned in the table below, along with the identified level of importance for each criterion and a description of the same.

Internet growth is a major factor that will drive the data center market in India during the forecast period. In India, the increasing smartphone penetration and deployment of 4G LTE technology is driving the number of internet users in the country. With the rollout of 5G networks, the connectivity and fixed broadband connectivity will improve significantly over the next few years. The average fixed broadband internet speed has also grown significantly in the past decade, leading to higher internet penetration in the country. By the end of 2019, there were around 510 million internet users in India and around 450 million smartphone users. According to Cisco, smartphone users will reach over 800 million by 2022.

Internet penetration is among the strongest drivers for data center growth in the APAC region. Also, the increasing social media usage among consumers and digital transformation by enterprises across industry verticals are major factors promoting data center growth. Mobile broadband networks have become the primary mode of internet access in most Asia Pacific nations, with more than a third of the region's population using mobile networks and devices. Data centers are built, operated, and maintained to process a vast amount of both customer and business data. The number of people accessing the internet has grown significantly in the past decade from about 1.77 billion in 2009 to 4.39 billion in 2019. The growth of internet users was driven by more affordable smartphones and mobile data plans. The amount of data generated has also grown by over 50 times because of the increasing use of desktop systems, smartphone penetration, social media, wearable devices, and connected devices.

The blow-molded plastics market is among the many technologies used in the production of plastic products. The other technologies used include compression- molded, extrusion molding, injection molding, and thermoforming. Blow-molded plastic containers are generally sold by vendors through their direct sales team and by through distributors who in turn have their own warehouses and sales personnel. Plastic products sold through distributors are generally made by generic molds while custom molds are used for clients who require specific design and shapes. Some clients also catered through proprietary molds.

This research report on the 3D sensor market provides a holistic view of the use of 3D sensors in various end-user verticals. The study also furnishes critical actionable qualitative as well as quantitative insights about this market across Asia-Pacific. Moreover, the report further elucidates the key drivers, restraints, and opportunities pertaining to the market growth and future trends analyzed along with key countries included in the report. Various Technologies of sensor technology considered while conducting this study such as stereo vision, time-of-flight and structured light. The report summarizes a detailed, exhaustive analysis of the implementation of 3D sensors across end-user vertical such as healthcare, aerospace, industrial, automotive, consumer electronics and others. The research study focusses on current trends and opportunities in the market, future growth potential of the market, and competition among the 3D sensor providers across— Asia Pacific. The study also provides analysis and insights of the 3D sensor market, highlighting the technological trends, adoption rate, industry dynamics, and competitive analysis of major players in the industry.

The global compression stockings market is analyzed on the basis of its prospect and future growth rate. The report highlights numerous factors that influence the growth of the global compression stockings market. These include market forecast, drivers, restraints, opportunities, and role of different key players operating in the market. . The study estimates the revenue generated from the sales of various compression stockings, which include knee high and thigh high. Moreover, it focuses on the demography segment, which includes men and women. Furthermore, it includes the revenue generated from the sales of compression stockings across North America, Europe, Asia-Pacific, and LAMEA.