-
481.2014年天然橡胶行业大盘点
[橡胶和塑料制品业] [2015-01-07]
关键词：2014；天然橡胶；行业盘点
-
482.全球糖果和烘焙包装市场报告（2015-2019年）
[食品制造业,橡胶和塑料制品业,造纸和纸制品业] [2015-01-07]
Confectionery products can be classified into three segments: Chocolate, Sugar Confectionery, and Gum. These items are popular among all age groups. In addition, the sale of confectionery products is independent of seasons or occasions.
关键词：糖果；烘焙；包装市场；包装业
-
483.全球饮料包装市场报告（2015-2019年）
[橡胶和塑料制品业,造纸和纸制品业] [2015-01-03]
Beverage packaging provides product support, external environment protection, and tampering resistance for beverages. Beverage packaging aids in reliable distribution of beverages among the value chain and reduces post production damage. The different types of materials used in the Beverages Packaging industry are glass, plastic, metal, and other packaging materials. The application of these packaging materials in the Beverages industry is found in hot drinks packaging, packaged water, milk and dairy products packaging, beer packaging, CSD packaging, sports and energy drinks packaging, RTD ice tea packaging, and alcoholic drink packaging.
关键词：饮料包装；产品支持；外部环境；保护；玻璃；塑料；金属
-
484.全球糖果和糕点包装市场报告（2015-2019年）
[橡胶和塑料制品业,造纸和纸制品业] [2015-01-02]
Confectionery products can be classified into three segments: Chocolate, Sugar Confectionery, and Gum. These items are popular among all age groups. In addition, the sale of confectionery products is independent of seasons or occasions. Packaging is an essential part of confectionery goods to preserve their quality, texture, and taste before they reach the end-customers. Confectionery dealers always look for packaging vendors that can provide appealing packaging solutions in terms of material, color, and innovations. This is critical to increase sales by enhancing product visibility.
关键词：糖果产品；包装；保持；质量；质地；味道
-
485.全球拉伸和收缩膜市场报告（2015-2019年）
[橡胶和塑料制品业,化学纤维制造业] [2015-01-01]
Stretch and shrink films are highly engineered polythene films used for packaging goods. These films have special chemical properties, which make them differ in their flexibility and stretch ability. Stretch films are stretchable, elastic thin polythene films used to wrap around pallet loads. Shrink films are thin films that are wrapped around a single product or commodity and require the application of heat for packing. These films help to prevent the spoilage of goods from air and moisture, thus enhancing the quality of packaged products.
关键词：伸展；收缩膜；高度工程化；商品聚乙烯薄膜；提高；包装；产品质量
-
486.PVC用衣康酸镧复合热稳定剂的制备与应用研究
[橡胶和塑料制品业] [2014-12-30]
采用皂化法合成了衣康酸镧,利用刚果红法考察了与其他热稳定剂的多元复配效果,得到PVC衣康酸镧复合热稳定剂,通过傅里叶变换红外光谱探讨了复合热稳定剂对聚氯乙烯(PVC)的热稳定机理,并用转矩流变仪、动态力学谱仪测定其加工性能和力学性能。结果表明,衣康酸镧、季戊四醇、硬脂酸钙、β-二酮质量比为3.5∶1∶1∶1时协同效果最佳,可使PVC试样的静态及动态热稳定时间达到66.0min和36.8min,并能较好地抑制初期着色性,其加工性能和力学性能与铅盐体系、硬脂酸镧复合热稳定体系相当,优于钙锌复合热稳定体系;复合热稳定剂在加热初期可减缓PVC脱除HCl的反应速率,抑制共轭多烯的形成,提高热稳定性能。
关键词：聚氯乙烯；热稳定剂；衣康酸镧
-
487.全塑车身外观与C面一体化关键技术的研究
[橡胶和塑料制品业] [2014-12-30]
根据旋塑成型的工艺特点、旋塑模具的设计及加工要求,通过合理地设计全塑车身的结构,使其在满足外观整体一次造型的前提下,实现结构与功能的有效结合,主要体现在外观与C面一体化过程中,整车车身与灯罩、挡泥板、翼子板、引擎盖等关键部位的有效结合,实现全塑车身的一体化和轻量化。
关键词：全塑车身；轻量化；旋塑成型
-
488.基于CAE的壳类制件翘曲变形的模具设计优化
[橡胶和塑料制品业] [2014-12-30]
探讨了注塑工艺中壳类制品发生翘曲变形的原因及相应的解决措施,借助Moldflow软件对复杂壳塑件进行了注塑仿真模拟,分析浇口的位置及数量的变化对制品翘曲变形的影响,从而得到最佳的模具结构设计,解决了该壳注塑过程中出现的翘曲变形问题,并通过生产实际验证了分析结果。
关键词：注塑；壳类塑件；翘曲变形；优化
-
489.PS/PETG共混物的流变性能和发泡行为研究
[橡胶和塑料制品业] [2014-12-30]
采用密炼机制备了聚苯乙烯(PS)和聚对苯二甲酸乙二醇酯-1,4-环己二甲醇酯(PETG)共混物;以超临界二氧化碳(CO2)为物理发泡剂,采用釜压法制备了PS和PS/PETG共混物发泡试样。通过旋转流变仪、扫描电子显微镜对PS和PS/PETG共混物的流变性能和泡沫的泡孔形态进行了表征。结果表明,加入PETG没有对PS的流变性能产生明显的影响,但对PS泡沫的泡孔形态影响显著,加入10%的PETG时,其平均泡孔直径由纯PS的22.68μm降至7.58μm,泡孔密度由3.45×108个/cm3提高到4.47×109个/cm3,泡孔尺寸分布明显变窄,说明PETG在PS中起到明显的气泡成核作用。
关键词：聚苯乙烯；聚对苯二甲酸乙二醇酯-1,4-环己二甲醇酯；共混物；流变性能；发泡行为；泡孔密度；泡孔尺寸分布
-
490.淀粉基生物降解塑料制备研究进展
[橡胶和塑料制品业] [2014-12-30]
简介了热塑性淀粉(TPS)的性质,分别总结了TPS/聚乳酸(PLA)共混物、TPS/聚己内酯(PCL)共混物、TPS/醇酸共聚酯共混物、TPS/聚碳酸亚丙酯(PPC)共混物、TPS/聚乙烯醇(PVA)共混物等热塑性淀粉与合成聚合物共混体系研究现状,以及TPS与天然大分子的共混体系研究现状,并提出了淀粉基生物降解塑料目前存在的问题及今后发展方向。
关键词：热塑性淀粉；生物降解；共混物；制备；聚乳酸；聚己丙酯；聚碳酸亚丙酯；研究进展
027-87841330