-
52021.智能电动汽车电机速度控制器设计与实施
[汽车制造业] [2014-03-24]
Motor operates as the power source of the vehicles,which is one of the most important parts in the vehicle system.This paper is going to find out the speed control method of the DC motor of Golf electrical cars from both theory and practice.A virtual instrument,which produces the Pulse Width Modulation (PWM) signal,is developed with LabVIEW to control the motor speed.This smart motor speed controller differs from the traditional mechanical control of DC motor in daily life,and is instructive and significant as a new speed control method of vehicle motor.
关键词：汽车；智能电动车；电机；速度控制器；PWM
-
52022.用于输送低温液体罐车的超韧钢的评价和应用
[汽车制造业] [2014-03-21]
The goal of the proposed project is to further develop and market advanced 70-ksi-yield strength super-tough steel (designated as NUCu60ST in the text) for use in tank cars transporting cryogenic liquids.
关键词：汽车；油罐车；危险品运输；超韧钢
-
52023.新兴产业周刊——2014年第8期
[综合,通用设备制造业,医药制造业,水利、环境和公共设施管理业,专用设备制造业,汽车制造业,计算机、通信和其他电子设备制造业,信息传输、软件和信息技术服务业] [2014-03-21]
本刊以七大战略性新兴产业——节能环保、新一代信息技术、生物、高端装备制造、新能源、新材料、新能源汽车为研究重点，关注国家高层和各部委的动态，剖析国家和地方的新兴产业政策。本刊设有政策导读、领导讲话、七大战略性新兴产业本周国内外行业动态和重点企业新闻、投资专题四大板块，能够实时监测新兴产业和重点企业动态，把握新兴产业发展方向，研究发展重点，寻求发展机遇。
关键词：节能环保；新一代信息技术；生物；高端装备制造；新能源；新材料；新能源汽车
-
52024.印度苏拉特的机动车辆购置研究
[汽车制造业] [2014-03-21]
This study assessed the trends in the future composition of motorized vehicles in the Indian city of Surat by analyzing a cross section of consumer purchases across used and new motorized vehicles, namely, two-wheelers and different size categories of cars. The findings have potential use in informing policies on infrastructure development and in controlling the negative externalities of car use.
关键词：汽车；汽车使用；汽车购买；因素分析
-
52025.车辆碰撞相容性协议增强的评价：皮卡和SUV首要及次要能量吸收结构的有效性
[汽车制造业] [2014-03-21]
The Enhancing Vehicle-to-Vehicle Crash Compatibility Agreement (EVC) was established in 2003 as a voluntary measure to reduce occupant fatalities of passenger cars in crashes with light trucks and vans, including pickup trucks, SUVs, minivans, and full-size vans, generically abbreviated as LTVs.these results provide some evidence that the EVC has reduced fatalities but are not sufficiently strong to permit an unequivocal conclusion that it has been effective in reducing fatality risk to car occupants.
关键词：汽车；车辆碰撞；车辆碰撞相容性协议；能量吸收结构
-
52026.集装箱侧吊自加载装置的设计方法
[汽车制造业] [2014-03-21]
The self-loading device used for side-crane is put forward.Its structure is presented.Based on the force analysis when the side-crane works at flat ground,the mathematical model is established when the crane working at uneven ground.And the design calculation is performed.The self-loading device's optimal design is accomplished.Based on the above calculation results,the self-loading prototype is manufactured.And the design method can be adopted to the similar equipment's structural design.
关键词：汽车；集装箱；侧吊；自加载装置；优化设计
-
52027.中国大城市北京和上海汽车所有权政策的效果评价
[汽车制造业] [2014-03-21]
关键词：汽车；所有权；汽车所有权政策；效果评价
-
52028.电动汽车无刷直流电机的仿真研究
[汽车制造业] [2014-03-21]
Aiming at working out how to apply the brushless DC motor to the electric car,a control systemwas designed after a series of related researches.With the basic principles and methods of operating the brushless DC motor being studied,the sirmlation model of controlling the brushless DC rrotor was designed by MATLAB software,and the related parameters were analyzed and studied.The results showed that the brushless DC motor had good controllability,which made it suitable for the application to the electric car.
关键词：汽车；电动汽车；无刷直流电机；控制
-
52029.燃油喷油泵柱塞弹簧的模糊多目标优化设计
[汽车制造业] [2014-03-21]
Fuzzy theory and multi-objective optimization technology were applied to design fuel injector pump plunger spring based on consideration on its force condition.The mathematical model for the multi-objective optimization design was built under the objective of the maximal fatigue safety coefficient,the minimal weight and height,with the design variable of wire diameter d,mean diameter D and working circle n.Then,the fuzzy solution of multi-objective optimization were use to solve the model.
关键词：汽车；燃油喷射泵；柱塞弹簧；多目标最优化；优化设计
-
52030.新兴产业周刊——2014年第7期
[专用设备制造业,医药制造业,水利、环境和公共设施管理业,信息传输、软件和信息技术服务业,汽车制造业,通用设备制造业,综合] [2014-03-21]
本刊以七大战略性新兴产业——节能环保、新一代信息技术、生物、高端装备制造、新能源、新材料、新能源汽车为研究重点，关注国家高层和各部委的动态，剖析国家和地方的新兴产业政策。本刊设有政策导读、领导讲话、七大战略性新兴产业本周国内外行业动态和重点企业新闻、投资专题四大板块，能够实时监测新兴产业和重点企业动态，把握新兴产业发展方向，研究发展重点，寻求发展机遇。
关键词：节能环保；新一代信息技术；生物；高端装备制造；新能源；新材料；新能源汽车
027-87841330