-
1611.化学镀法制备Ni-MCM-41
[非金属矿物制品业] [2015-09-19]
含镍介孔分子筛Ni-MCM-41是一种潜在的(性能优良的储氢材料，采用水热合成法制备得到Ni-MCM-41，然后在机械搅拌和超生波"种混合模式下，采用化学镀的方法将金属负载在Ni-MCM-41表面，以制备Ni-MCM-41所制的样品。通过e射线衍射仪(透射电子显微镜和氮吸附脱附测试等分析方法进行表征。结果表明"化学镀法在Ni-MCM-41表面负载镍是可行的，且对其结构有较好的改性作用，超生波更有利于化学镀镍。其最佳温度为80C这表明化学镀法也是一个较好的制备金属B非金属复合介孔材料的方法。
关键词：Ni-MCM-41；化学镀镍；超生波；金属复合材料
-
1612.全球眼镜市场报告（2015-2019年）
[非金属矿物制品业,其他制造业] [2015-07-27]
Eyewear is categorized into prescription eyewear, non-prescription eyewear, and others. Prescription eyewear consists of products that are prescribed to a consumer by an ophthalmologist to enhance and correct defects in vision, while non-prescription eyewear consists of products that can be purchased and worn without a prescription. Technological advancements and the use of innovative materials have resulted in many new designs in the market.
关键词：眼镜；处方眼镜；非处方眼镜；提高；视力缺陷；纠正；技术性进步；创新材料
-
1613.使用数字全息技术对透明材料的特征测量
[非金属矿物制品业,信息传输、软件和信息技术服务业] [2015-07-24]
Digital holography is applied to measure the characteristics of transparent material. A digital hologram recording system to measure the surface of transparent material was established, and the digital holograms of transparent object were obtained in high quality. For postprocessing of hologram, the least-squares phase unwrapping algorithm was used in phase unwrapping, and the phase reconstruction image of transparent object was obtained. The information of material surfaces was measured and the characteristic was presented in 3D visualization. The validation experiment was conducted by NanoMap 500LS system; the results of validation experiment are well satisfied with the measurement by digital holography, which proved the feasibility of digital holographic technology as a good measurement tool for transparent material.
关键词：汽车；透明材料；数字全息技术
-
1614.全球生物活性玻璃市场报告（2015-2019年）
[非金属矿物制品业,医药制造业,科学研究和技术服务业] [2015-07-24]
Bioactive materials refer to a group of materials including composites, ceramics, and glasses that interact with biological systems and aid in repair and replacement of diseased tissue or bone. Bioactive glasses are an important category of bioactive materials that promote self-healing by interacting with body fluids and tissues without affecting the health and tissues of living organisms. They have a wide range of applications in surgical procedures, especially in tissue replacement and tissue repair. Bioactive glasses are composed of silicon, calcium, sodium, and phosphorus. They are widely used in orthopedics, followed by dentistry and cosmetic applications. They are commercially available in various forms such as powders, nano-powders, and granules.
关键词：生物活性材料；生物系统；修理；替换；患病组织；骨；促进；自我愈合；体液；组织
-
1615.全球量子点市场报告（2015-2019年）
[非金属矿物制品业,专用设备制造业] [2015-06-13]
Quantum dots are nanocrystals made of semiconductor materials. Despite their small dimensions, they exhibit excellent optical properties when excited. These dots emit fluorescent light of different intensities depending on their tuning and size. They can be tuned according to the required emission or absorption wavelength, and this has led to their increased commercialization.
关键词：量子点；半导体材料；纳米晶体；光学特性激发；调谐发射；吸收波长
-
1616.中国防弹玻璃市场报告（2015-2019年）
[非金属矿物制品业] [2015-06-01]
Bulletproof glass, also known as bullet-resistant or ballistic glass, refers to a composite made up of glass laminates and thermoplastic layers.
关键词：中国；防弹玻璃；安全玻璃
-
1617.全球医疗陶瓷市场报告（2015-2019年）
[医药制造业,非金属矿物制品业] [2015-04-07]
Medical ceramics find extensive use in the Medical sector for a variety of applications, including treatment of cancer and related diseases, joint and hip reconstruction, and in the production of implantable electronic devices. These inorganic and non-metallic materials are also being used worldwide in various dental and orthopedic applications, and in the manufacture of surgical and diagnostic instruments. On the basis of material used, these ceramics can be classified into three: bioinert, bioactive, and bioresorbable. Bioinert ceramics such as aluminum oxide, zirconium oxide, silica oxides, and titanium oxide have been the most commonly used ceramics in the Medical sector. In recent years, however, manufacturers have been leaning toward bioactive ceramics such as bio-glass. Hydroxyapatite, a bioresorbable ceramic, has also been gaining popularity among market players in the last few years.
关键词：医疗陶瓷；医疗部门；广泛使用；治疗癌症；相关疾病；关节；髋关节；植入式电子装置
-
1618.英国瓷砖市场报告（2015-2019年）
[非金属矿物制品业,建筑业] [2015-03-24]
Ceramic tiles are made from ceramic materials such as porcelain and earthenware. Tiles are made by mixing sand, clay, and other natural products. These tiles are manufactured by molding raw materials to the required shape and design, followed by heating at high temperature in a kiln. Ceramic tiles are available in many designs and variants, and are suitable for homes, indoors, and outdoors. The aesthetic value of the tiles makes them an ideal choice for floor coverings and other decorative uses.
关键词：陶瓷砖；陶瓷材料；成型原料；形状和设计；装饰用途
-
1619.全球平板玻璃市场报告（2015-2019年）
[非金属矿物制品业] [2015-02-24]
Flat glass is a type of glass manufactured as a flat sheet and used to make windows, facades, and doors for houses and buildings, and windshields and windows for automobiles. It is also used in solar equipment such as solar thermal panels and photovoltaic modules. It finds application in interior fittings and decorations, furniture, and electronic equipment. Based on product type, flat glass is classified into three types: float, sheet, and rolled.
关键词：平板玻璃；平片；浮子；片材；轧制
-
1620.V掺杂Li2FeSiO4正极材料的制备与电化学性能
[非金属矿物制品业] [2015-01-30]
采用固相法制备了V 掺杂的锂离子正极材料Li2FeSi(1–x)VxO4(其中x=0，0.05，0.10，0.15)。通过X 射线衍射(XRD)、扫描电子显微镜、粒度分析、恒流充放电测试及交流阻抗谱测试等方法研究制备样品的结构、形貌及电化学性能。结果表明：掺杂后样品的衍射主峰与Li2FeSiO4 的XRD 谱一致，样品的一次粒径分布在200～500 nm 之间，颗粒分散较为均匀，掺杂后样品的粒度分布更为一致。电学性能测试显示：x=0.10 时，样品表现出较好的电学性能。在0.1C 下放电，Li2FeSi0.90V0.10O4的首次放电容量为163 mA·h/g，与Li2FeSiO4 相比容量增加了66.2%，循环30 次后的容量仍保持在27mA·h/g，具有良好的循环性能。
关键词：锂离子电池；正极材料；硅酸铁锂；离子掺杂
027-87841330