The automobile industry, since the last decade, has been undergoing systemic shifts in the context of engine downsizing, vehicle system electrification, pollution controls, accessibility and health. The market is in close accordance with the economic climate and customer confidence. After the subprime crisis of 2008, the market was experiencing a slowdown, with car prices plummeting between 2010 and 2012, along with big North American OEMs suffering financial difficulties. This emerged from the subprime crisis with car revenues in North America, hitting pre-recession rates. The US, North America's largest economy, has emerged from the subprime crisis and reported steady growth in GDP.

Currently, the world is witnessing growing demand for low temperature co-fired ceramics, which is mainly due to the rising demand from the automotive sensors operating at harsh conditions. Also, there have been technological advancements in the electronics and computational industry. The miniaturization of electronics, followed by the demand for high computational speed, has produced harsh operating conditions for the electronic components. These conditions have consequently given rise to concerns such as heating, leading to the compromise in the performance of the gadgets. Therefore, researchers/industry professionals have had to reconsider the technological upgradations in tandem with good performance and paved way for the development of multilayer circuits or LTCC tapes. The primary factors leading to the demand for this technological innovation is increasing use of electronics in the automotive sensors, military and defense, aviation, and micro electro-mechanical sensors (MEMS), among others.

Increase in demand for pressure sensors for various applications fosters the market growth globally and is estimated to increase further during the forecast period. The competitive advantages of pressure sensors over conventional alternatives have also been described in the report. Pressure sensors have a wide range of applications in automobiles such as cabin pressure, fuel & ignition, exhaust, and thermal & powertrain systems. These sensors have ample opportunities in consumer electronics such as in smartphones, tablets, and wearable devices, which will boost the market growth of pressure sensors. The scope of the report discusses the potential opportunities for the market players to enter the pressure sensor market. This report also provides in-depth analysis of the market, outlining current trends, key driving factors, and key area of investment. The report includes Porter’s five forces analysis to understand the competitive scenario of the industry and role of each stakeholder in the value chain. It features the strategies adopted by the key market players to maintain their foothold in the market.

Power tools have revolutionized the construction, automotive, and other industries, by saving the time and effort required for simple operations including screw driving to complicated operations such as sawing and breaking. The constant upgradations in these power tools assist in boosting their demand. In addition, the ease of use provided by power tools has made them popular even for non-professional users mainly in household operations. The small sizes and easy availability of power tools promote their adoption even in normal day-to-day applications such as drilling, cutting, and others, which in turn drives the market growth.

The automobile regulatory framework in Europe and North America has been instrumental in creating a sustainable environment in the automobile industry. The latest regulatory framework, the Euro 6, which was introduced in 2011 and came into effect in September 2014, changed the regulatory standards that have been crucial in determining the dynamics of the automotive market in the region. Since 2013, the EC (European Commission), along with EEA/EMEP, has been maintaining the record of emission performance standard for each new vehicle registered in Europe. The emission regulations bind the automotive manufacturers together. The freight companies and fleet owners are rapidly moving toward incorporating more technologies that are expected to reduce the average emission rate. Thereby, a need to reduce vehicle weight for lowering emission levels has greatly encouraged the employment of high pressure die casting (HPDC) parts in vehicles.

Wireless power transmission involves the transfer of electrical power from transmitter to receiver without any wired connection. Introduction of smart charging mats and newly launched ground pads specifically for electric vehicles increases the demand for wireless charging systems globally. Increase in sales of electric vehicles (EVs), constant advancements in portable electronics as well as wearables, and frequent need for harvesting ambient RF energy are expected to drive the growth of the global wireless electric vehicle charging market during the forecast period. However, expensive technology for its integration and slower charging as compared to other charging technologies hamper the market growth. The wireless electric vehicle charging market is segmented on the basis of power source, installation, distribution channel, vehicle type, and region. The power source segment is divided into 3≤11 kW, 11–50 kW, and >50 kW. Based on installation, the market is bifurcated into home and commercial. Depending on distribution channel, it is segregated into OEMs and aftermarket. The vehicle type segment is classified into battery electric vehicles (BEV), plug-in hybrid electric vehicle (HEV), and commercial electric vehicles. Region wise, it is studied across North America, Europe, Asia-Pacific, and LAMEA.

Wireless power transmission transfers electrical power from transmitter to receiver without any wire connection. Wireless charging technology allows multiple devices to connect wirelessly. The smart charging mats and newly launched ground pads specifically for electric vehicles increase the demand for wireless charging in the market. In addition, with the use of laser and microwave technology, the Startup Company Wi-Charge Ltd. has developed technology that charges electronic devices such as smart phones, bands, and earbuds from a significant distance. Increase in sales of electric vehicles (EVs), constantly evolving portable electronics as well as wearables market, and frequent need of harvesting ambient RF energy are expected to drive the wireless charging market during the forecast period. However, expensive technology for its integration and slower charging as compared to other charging technologies are expected to hamper the growth of the market.

The high usage of magnetic sensors in new navigation devices, presence detection (building automation related applications), medical areas, and the automotive sector is leading to a paradigm shift in the magnetic sensors market, worldwide. As the efficiency and capabilities of these sensors improve over time, their enhanced ability to measure without physical contact is leading to their crucial application in electronic systems. There are emerging applications in the field of automotive, used as automotive control systems, braking systems, engine control systems, etc., whereas in other areas, these are deployed in systems, like an electronic compass in mobile phones. The application of magnetic sensors is increasing due to their ability to convert motion into signal remotely and provide information and intelligence to objects; this is driving the demand for automotive and IoT applications. For instance, Infineon offers Xensiv line of magnetic sensors specific to the automotive industry; the company's Hall and GMR based magnetic speed sensors find applications in safety and powertrain applications, such as ESP, ABS, camshafts/crankshafts, and automatic transmissions.

Automotive trims are the plastic components installed in the vehicle to provide a better look and features to the vehicle. Numerous components such as front & rear bumpers, dashboards, and similar others installed in a vehicle describe different trims, which have a wider application in a vehicle. The automotive trims market has witnessed significant growth over the years, owing to increase in trend vehicles, which are equipped with light weight components to increase the efficiency of the vehicles. The automotive trims market is segmented into material type, interior application, exterior application, vehicle type, end use, and region. By material type, the market is categorized into acrylonitrile butadiene styrene (ABS), polypropylene (PP), polyoxymethylene (POM), thermoplastic elastomer (TPE), and others. By interior application, it is classified into dashboards, door panels, and several other components. By exterior component, it is divided into bumpers, window & door seals, and others. ICE passenger vehicle, ICE commercial vehicle, battery electric vehicle (BEV), hybrid electric vehicle (HEV), and plug-in hybrid electric vehicle (PHEV) are the different types of vehicles studied in the global market. Original equipment manufacturers (OEMs) and aftermarket are the different end users of the automotive trims. By region, the market is analyzed across North America, Europe, Asia-Pacific, and LAMEA.

The report incorporates the study of the automotive tire that focuses on the seasonal tires, rim size used by each vehicles, and the channel through which the tires are operated in the business. A rubber tire is a component fitted around the rim of a wheel to transfer the load of a vehicle from the axle to the ground. Majority of the tires are pneumatically inflated to offer a flexible cushion with shock absorption when the tire travels over a rough surface. Moreover, automobile manufacturers are inclining toward electric and alternative fuel vehicles due to implementation of vehicle emission regulations. The rise in production of commercial and passenger cars along with the new advanced technology creates a demand for the tire business globally. For instance, Bridgestone came up with new innovative tires “Ecopia EP500 ologic”. These tires are based on “Ologic technology” which uses synergies of large diameter in conjunction with smaller width. Furthermore, this solution improves fuel efficiency by reducing rolling resistance and environmental impacts. In addition, the Continental started offering different categorized tire as their product such as winter, all seasoned and summer to boost the sales of tire in the global market.