关键词：粒状材料;性能（工程）;履带车辆;干燥材料
摘 要：This paper presents an experimental study of the performance of a single track device driving on dry, granular soils. A single-track test rig is used to empirically investigate track motion under controlled track slip and loading conditions on three natural dry granular materials:a dry sandy material with 100 um average grain size, a dry sandy material with 400 um average grain size, and a coarse gravel with 1 cm average particle size. Test conditions can be designed to replicate typical field scenarios for lightweight robots, while key operational parameters such as drawbar force, torque, and sinkage are measured. This test rig enables imposition of velocities, or application of loads, to interchangeable running gears within a confined soil bin of dimensions 1.5 m long, 0.7 m wide, and 0.4 m deep. The tested single track device has an effective contact area measuring approximately 25 cm x 10 cm and it is tested under three vertical loads 125 N, 155 N, and 190 N. Slip is varied within -50and +50during travel over the three soils. The track utilizes a flexible rubber belt equipped with 0.5 cm tall grousers. Experimental measurements are compared against well-established semi-empirical models, to assess the predictive accuracy of these models.