关键词：电子信息；计算机；垂直切割；模拟
摘 要：This paper presented a finite element simulation model for the analysis of AISI D2 orthogonal cutting process using TiAIN coated inserts. Firstly, AISI D2 material constitutive model was built based on power law model, which was used in the FEM codes to describe the effect of strain, strain rate and temperature on the material flow stress. In modeling the chip formation, a damage model was employed to predict the chip separation. Then cutting edge radius and thickness of TiAIN coating of cutting tool were measured by SEM. Friction coefficients of cutting tool against AISI D2 steel were obtained by ball-on-plate friction tests on UMT-2 high speed tribometer. Finally, finite element simulations of AISI D2 orthogonal cutting processes were performed using Advantedge? software. The simulated results of cutting forces and chip morphology showed good agreement with the experimental results, which validated the reliability of the cutting process simulation method.