关键词：大桥护栏；碰撞测试；钢铁
摘 要：In August 2010, Midwest Roadside Safety Facility (MwRSF) developed and crash tested a low-cost, energy-absorbing bridge rail for the Manual for Assessing Safety Hardware (MASH) TL-3 applications. This low-cost bridge rail was designed to be compatible with the Midwest Guardrail System (MGS) such that an approach transition would not be required between the two barriers. It was desired that the system minimize bridge deck and rail costs. As part of this project, several concepts for an energy-absorbing bridge post were developed and tested. These concepts included strong-post systems designed with plastic hinges and weak-post systems designed to bend near the attachment to the bridge deck. The final post concept incorporated S3 OE 5.7 steel sections designed to yield at their bases. These posts were located on 6 ft-3 inches on center. A W-beam section was used as the rail element and was attached to the posts with a bolt designed to break during and impact event. Two full-scale crash tests were performed according to the TL-2 impact conditions provided in MASH. The new bridge rail system successfully met all the safety performance criteria for MASH TL-2. The Texas Type T631 Bridge Rail was developed as a low-cost, energy absorbing bridge rail system for TL-2 applications. Many of the features used for the system tested at Midwest Roadside Safety Facility for TL-3 were incorporated into the design developed for this project for MASH TL-2 application. The TxDOT Type T631 Bridge Rail designed and developed for this project was evaluated under MASH TL-2.