Intake filter media is an air cleaning component fitted in air filters to capture dust and other particles from the air before allowing them to enter the engine. The use of different kinds of air filter media (natural and manmade) depends on various application areas, for instance, automotive, aerospace, marine, and others. There are various kinds of air filter materials (for instance, paper, foam, or cotton) that can be chosen to capture different types of particulate matter from entering the engine. The intake air filter media efficiently blocks the entry of particulate matter into the engine's cylinders, where it can cause severe mechanical damage and oil contamination.

A charging station is part of the grid infrastructure installed along a street, parking lot or in a home garage; its primary purpose is to supply the power to the different types of electric vehicles (PHEV, BEV and HEV’s) for charging the battery. The AC charging system is commonly an on-board charger mounted inside the vehicle, and it is connected to the grid when the vehicle is plugged in. An onboard charger is responsible for the final stage of charging the battery pack. It takes the AC power source from the EVSE and transforms the power into the required battery-charging profile.

Car subscription service is the new generation vehicle ownership model, which allows to opt for a vehicle with fixed fee, particularly for less than 2 years and more than 1 month. Car subscription providers also provide the maintenance and insurance expenses along with the option for multiple switching of the vehicle as per the contract between the service provider and car subscription consumer. Car subscription services only include the services opted for passenger cars such as compact, mid-size, and SUV propelled by either IC engine or electric powertrain. The number of market participants operating in the global market is large and it is difficult to be consolidation as these players are operating in the domestic regions only.

An automotive motor is designed to translate a type of energy (such as electric) into mechanical energy. The combination of mechanics and electronics has led to incorporate increased number of motors in vehicles, owing to their comfort and convenience features. Automotive motors have applications in electronic power steering, seating control, electric vehicles drivetrain, and others. The automotive motors market is driven by factors such as increase in global vehicle production, high demand for safety & convenience features, and rise in demand for electric vehicles. However, increased weight and cost of the overall system restrict the market growth. Moreover, wide number of applications employing the use of electric motors and the concept of autonomous cars create lucrative growth opportunities for the market.

Automotive fabric in the vehicle’s interior increases the interior feels as well as vehicle safety. It has properties such as cold cracking resistance, high durability, UV rays stable, easy to clean, and helps in minimizing fatigue. Automotive fabrics, such as headlining, truck lining, and spray adhesive, are used to repair or replace the spoiled interior surfaces. Automotive fabric includes interior components of vehicles such as headliners, cockpit modules, door panels, automotive seats, flooring, vehicle acoustics, and others. Furthermore, the market is segmented into fabric type, application, vehicle type, and region.

Automotive ceramics are advanced inorganic ceramic materials, that are currently being employed for producing key automotive components, to cater to specific applications. Their combination of physical and thermal properties make them an ideal choice for thermal management, wear & tear, and automotive electronic components. Ceramic materials can be engineered or processed through various techniques into components and coatings. Coatings of ceramic materials on metal is done for increased thermal barrier protection of metal parts, mainly in the engine block. Technical ceramics majorly include zirconia, alumina, and silicon carbide, it is commercially available in various grades.

Automotive differential is a part of front and/or rear axle assembly that plays an integral role in a vehicle and is designed to allow moving of wheels at different speeds. It is a part of automotive driveline, which transmits the desired torque and power to the wheels to perform driving operations. The primary function of this system is to provide proportional RPMs between two connected wheels. For instance, when a vehicle goes around the corner, the outside wheel must travel faster than the inside wheel. The differential distributes equal amount of torque to both the wheels. In addition, this system provides wheels with resistance and traction. Moreover, sale of differential assemblies is directly driven by automotive production activities across the globe. These procurements are completed through contracts and agreements between original equipment manufacturers and differential assemblies’ manufacturers.

The key objective of geospatial analytics is to combine GIS technology with various scientific technology to process, transform, and validate useful information for business process. In addition, manufacturing and automotive industries are adopting geospatial analytics to provide better communication between organization and people. Numerous benefits are associated with geospatial analytics such as it allows customers to capture & process different services, modifies existing orders, and processes customer moves.

Power cutters are prominent tools that have unlimited applications across most industrial, commercial, and even household usage. Power cutters have been a convenient resource, aiding workers across industries. The use of power cutters can eliminate the need for strenuous manual labor. Their use in the construction and automotive sectors gives new opportunities for innovation in the power cutters market. The global power cutter market is highly competitive with low market concentration. However, the average price of the product has been declining owing to the maturing technology and declining prices of raw materials. Vendors are, thus, introducing innovative features to differentiate their products in the market. The introduction of innovative products, such as infrared heat guns, can also become a possible threat to the market. However, infrared heat guns are not ideal for all commercial, industrial, and residential use. Furthermore, these products are also more expensive than the average price of heat guns.

Ultra-thin glass is a very thin glass with thickness range below 1mm. It offers different features making it one of the preferred materials of choice over plastics, metals, and silicon. This study provides information on the usage of ultra-thin glass in various end-use industries. The study is segmented on the basis of thickness (<0.1mm, 0.1mm-0.5mm, and 0.5mm-1.0mm), end-use industry (consumer electronics, automotive & transportation, etc.), and region (North America. Europe, Asia-Pacific, and LAMEA). The study mostly deals with the usage of ultra-thin glass mainly in consumer electronics, automotive & transportation, medical & healthcare, and others. The study also includes in-depth information of the major players in the market.