关键词：碳纳米管；电气性能；力学性能；热力学性质
摘 要：For this effort, will concentrate on three applications: Vibration Gyroscope utilizes piezoelectric properties of the tape and Coriolis effect Accelerometer utilizes the piezoresistive property Strain Gauge utilizes piezoresistive property Accelerometer and Strain Gauge can also utilize piezoelectric effect Test piezoelectric properties using facilities at the Microfabrication Laboratory (AMRDEC). Enhance piezoelectric effect using polyvinylidine fluoride and P(VDF)(TrFE) which is readily polarizable. Spray matrix solution while winding fiber; Sandwich of CNT tape and PVDF film (DOE Two Level). Construct and test prototype vibration gyroscope. Construct and test prototype accelerometer using cantilever design. Test strain sensitivity of CNT tape against industrial strain gauge. Embed CNT tape in composite samples as well as on surface and test to failure (4 point bend). A piezoelectric device exhibits an electrical response from a mechanical applied stress. A piezoelectric device has both capacitance and resistance properties in which by applying an electric field from a waveform will exert a mechanical stress that can be monitored for a response. The typical waveform applied is a sinusoidal waveform of a defined voltage for a defined period. The defined voltage is driven from 0 volts to the positive defined volts then back to 0 and driven to negative defined volts then back to 0. Example. Vmax set to 10V and period set to 10 ms. Voltage will start at zero, go to 10 volts, return to zero, go to 10 volts and return to zero during 10 ms. Applying this electrical field to a DUT, the capacitance response and resistance response can be observed. CNT tape is easier to manufacture and cheaper than micromachining silicon or other ceramic piezoelectric used in gyroscopes and accelerometers. CNT tape properties can be modified during manufacture for specific application. CNT tape has enhanced mechanical and thermal properties in addition to unique electrical properties. CNT tape as a strain gauge in Structural Health Monitoring will provide an excellent material to embed within composite structures.