关键词：聚合物；柔性；Tg；共晶焊接
摘 要：We present a cost-efficient and reproducible technique for assembling 3D components to mechanically bendable low glass transition temperature (Tg) polymeric interposers. First, we propose localized soldering using a focused hot air gun. Second, we use eutectic solders, which permit reflow at temperatures close to the Tg of the interposer. Then, we adopt differential heating and cooling in order to enable rapid heat dissipation through the interposer during soldering. Furthermore, we apply a metal jig as a load to maintain contact between the interposer and the 3D component during soldering. Also, the jig serves as a shield to protect the interposer surface outside the soldering zone from thermal loading, and more importantly as a passive heat sink. We showcase our approach by manufacturing a test vehicle on a polyethylene terephthalate (PET) interposer having a Tg of 71 deg. C. We solder a 30 mA DC current SMD LED by means of a eutectic compound of 48 w. % Sn and 52 w. % In at 118 deg. C.