10月，下游房地产开发投资与基建项目投资增速继续放缓，工程机械市场需求不振，主要产品销量仍呈现快速下滑态势。

报告从产业动态、产业分析、技术趋势、企业跟踪、地方动向等几个方面对生物科技产业进行了分析评论。

Anesthesia machines are used by anesthesiologists to administer anesthesia. They are also used to administer other medical gases such as nitrous oxide. The most commonly used device is the continuous-flow anesthetic machine, which provides a continuous flow of air containing a regulated supply of medical gases. Modern anesthesia devices have monitors and touch screen displays integrated into them, which help in monitoring the heartbeat of patients.

A hypodermic needle is a hollow needle commonly used with a syringe to inject substances into the body or extract fluids from it. A hypodermic needle is used for rapid delivery of liquids, or when the injected substance cannot be ingested. Hypodermic needles are broadly classified as Non-safety and Safety Needles based on the safety feature associated with the device. Safety needles have been further segmented as Active and Passive devices based upon the requirement of user intervention to activate the safety mechanism. Based on the mechanism of activating this safety feature, active devices are further classified as Manual and Semiautomatic devices.

Elderly and disabled assistive devices enable the elderly and disabled population to carry out their everyday activities that involve movement, hearing, and reading with ease. The devices are designed for the elderly and disabled population to live more independently with a good quality of life. The devices include both simple and complex products in design. For instance, wheelchairs, crutches, and mobility scooters are among the simplest in design, while reading machines, hearing aids, and transfer lifts are much more complex in design.

Pneumatic equipment uses compressed gas (air or any other inert gas) to produce mechanical motion. The equipment is used in volatile environments where hydraulic or electric tools cannotbe used. It is also used in various industries such as Construction, Metallurgy, and Oil and Petrochemical. Pneumatic equipment is safer than electric and hydraulic tools and it is increasingly being adopted by end-users for industrial applications.

The upper operating temperature of tubes in heat exchangers/steam generators is strongly influenced by the degradation that can occur because of the reaction of the exchanger/generator tubing with the deposits that accumulate on the surface of the tubes. In fact, severe corrosion has been observed in some biomass fired systems, particularly with elevated potassium and chlorine concentrations in the deposits. Wood gasifiers have recently been and are currently being constructed at several sites in North America. In these systems, the syngas is burned to produce steam and the performance of the heat exchanger tubes under ash deposits is of great concern. As temperatures of the heat exchangers are increased in an effort to increase their operating efficiency, the performance of the tubes is of greater interest. The corrosion behavior of alloy steel tubes as a function of temperature has been investigated by exposing samples of selected alloys to ash collected from the steam generator fired by syngas produced in wood gasifiers. This study compares corrosion rates from laboratory exposures of synthesis gas and ash at 500 degrees C and 600 degrees C.