报告从产业动态、产业分析、技术趋势、企业跟踪、地方动向等几个方面对生物科技产业进行了分析评论。

An automotive turbocharger is a component that compresses air fed to a vehicle's engine. This helps the engine produce more power, offer improved fuel efficiency, and afford cleaner fuel combustion, thus improving overall performance. An automotive turbocharger mainly consists of three components: a turbine, a compressor, and center housing. Automotive turbochargers are further classified as standard, ball-bearing, twin-scroll, and variable-geometry/variable-nozzle turbochargers.

Central venous access devices are devices inserted into the central venous system to administer medication or fluids, draw blood, and measure central venous pressure. These devices are made up of a non-irritant material such as silicone so that they can be left in place for several weeks or months. Central venous access devices are recommended when there is difficultly to obtain peripheral venous access or in case of certain intravenous therapies such as chemotherapy, total parenteral nutrition, prolonged medication, repeated transfusions of blood or blood products, and frequent blood sampling. These devices are inserted either by surgeons or interventional radiologists with or without the use of general anesthesia. CVCs, PICCS, and implantable ports are the most common types of central venous access device. The catheter has one end positioned outside the body and the ports are surgically placed under the skin and require a special needle for access. Occlusions are a common complication associated with these devices, which can be thrombotic, mechanical, and precipitate occlusions.

Metering pumps are devices used for pumping fluids in a measured and accurate way. The pumps are used to control the rate of flow of fluids such as water, chemicals, and solutions used in industrial processes. Most of the metering pumps are able to discharge fluids with high pressure. A metering pump model typically includes a pump head and a motor.

Over the past few years, due to technological innovations, a shift from the traditional methods of surgeries to robot-assisted techniques have been observed. Robotic surgery is a technique in which a surgeon performs surgery using a computer that remotely controls very small instruments attached to a robot. The main aim of robotic surgery is to reduce the patient’s stay in the hospital, to minimize the pain and scarring associated with surgery, and to facilitate faster recovery.

本刊以七大战略性新兴产业——节能环保、新一代信息技术、生物、高端装备制造、新能源、新材料、新能源汽车为研究重点，关注国家高层和各部委的动态，剖析国家和地方的新兴产业政策。本刊设有政策导读、领导讲话、七大战略性新兴产业本周国内外行业动态和重点企业新闻、投资专题四大板块，能够实时监测新兴产业和重点企业动态，把握新兴产业发展方向，研究发展重点，寻求发展机遇。

本刊以七大战略性新兴产业——节能环保、新一代信息技术、生物、高端装备制造、新能源、新材料、新能源汽车为研究重点，关注国家高层和各部委的动态，剖析国家和地方的新兴产业政策。本刊设有政策导读、领导讲话、七大战略性新兴产业本周国内外行业动态和重点企业新闻、投资专题四大板块，能够实时监测新兴产业和重点企业动态，把握新兴产业发展方向，研究发展重点，寻求发展机遇。

本刊以七大战略性新兴产业——节能环保、新一代信息技术、生物、高端装备制造、新能源、新材料、新能源汽车为研究重点，关注国家高层和各部委的动态，剖析国家和地方的新兴产业政策。本刊设有政策导读、领导讲话、七大战略性新兴产业本周国内外行业动态和重点企业新闻、投资专题四大板块，能够实时监测新兴产业和重点企业动态，把握新兴产业发展方向，研究发展重点，寻求发展机遇。