Landing strings equipment are heavy-duty thick wall drill pipes, which are used for oil and gas well drilling purposes in offshore areas. These are also used for landing heavy equipment on the seabed and landing heavy casing strings in wells. In subsea wells, landing strings allow well intervention or completion activities to be performed safely from floating vessels by interfacing with the subsea wellhead on the seabed. Landing strings are thick-walled steel tubes that are used to connect offshore drilling rig surface equipment with the bottom hole assembly.

House wraps are types of fabric, paper, or board materials that cover the exterior sheathing of house walls and protect the wall exteriors.

Ergonomic chairs are designed to help users sit comfortably for extended periods while working. These chairs are more comfortable than standard chairs and allow users to customize the fit to their body or sitting preferences. They aid in increasing productivity and job satisfaction. Ergonomic chairs help to reduce the risk of musculoskeletal injuries such as back pain. These also help to relieve back pain by promoting proper posture and hip and pelvic alignment. It reduces the need for repetitive trunk flexion by preventing slouching and forward head posture.

The global dissolving wood pulp (DWP) market refers to the worldwide market for a type of wood pulp that is primarily used for the production of viscose staple fiber (VSF) and other cellulose-based products. DWP is obtained through a chemical process that breaks down wood chips into individual cellulose fibers, resulting in a high-quality and pure form of pulp.

Decking is a flat or profiled surface that is designed as a structure to be deployed for residential and commercial applications.

Flooring is a permanent covering over particular floor composition with a finished material to provide a comfortable structure to walk. Also, flooring is usually durable, easy to clean, noiseless, and offers an aesthetically appealing appearance. Most flooring products offer heat and fire resistance and are cost-efficient. Floor bases are often covered with fine finishing materials that may vary for residential and non-residential buildings.

The equipment described in this report are primarily defined by its title since the title is generally long and includes most of the criteria used to differentiate the equipment from other similar equipment. The equipment descriptions are sourced from the U.S. Census. Additionally descriptions can be collected from the manufacturing industry descriptions that each equipment is categorized. The U.S. Census manufacturing industry descriptions for equipment are listed below

Manufacture of veneer sheets thin enough to be used for veneering, making plywood or other purposes: Smoothed, dyed, coated, impregnated, reinforced (with paper or fabric backing) Made in the form of motifs Manufacture of plywood, veneer panels and similar laminated wood boards and sheets Manufacture of particle board and fibreboard Manufacture of densified wood

This data equals output data for the following ISIC Rev. 4 code: 1623 Manufacture of Wooden Containers This class includes: Manufacture of packing cases, boxes, crates, drums and similar packings of wood Manufacture of pallets, box pallets and other load boards of wood Manufacture of barrels, vats, tubs and other coopers' products of wood Manufacture of wooden cable-drums

Buildings account for up to 24% of greenhouse gas emissions and over 40% of the primary electricity use worldwide. These numbers are increasing YOY due to the rising world population and improving living standards. The global landscape is likely to be confronted with energy shortage in the future, and unfavorable climate changes are quite evident. It has been established with sufficient evidence that the present energy generation system is not sustainable. There is a need to shift to renewable sources, such as solar energy, for clean and sustainable energy.